Silicone Nitride Hot Surface Ignitor for Gas Furnace Boiler Water Heaters

Description

SEE LIST BELOW FOR COMPATIBLE MODEL NUMBERS.  Originally purchased through Amazon but not the right one , past return window before we figured it out.  You can contact the MOFLAME / Amazon seller if you have install questions! I can link you to the product page.
➢The hot surface ignitor is premium nitride construction, White high temperature Teflon coated leads, OEM spec lead size connector for quick mount
➢Rated voltage: AC 120V +/- 10%-15%.50/60HZ; Coldresistance:18-40 ohm (Ω)； Rated current at 17 sec: 1.1-1.2 amps，voltage:l120v-132v. You can measure whether the Hot Surface Ignitor is working properly with a multimeter.
➢Hot side igniter/igniter temperature: >= 1100°C at 102V/ 17 seconds . >= 1180°C at 120 V/ 17 seconds ,>= 1400°C at 132 V/ 17 seconds .Common repair replacement with HVAC CONTROLS, Janitrol, Furnace, Janitrol Furnace, Amana Goodman etc Furnace Hot Surface Ignitor/Igniter
➢Compatible models: DMS90453BXA, P1256701F , P1256707F , DMS90703BXA, P1256702F , P1256708F , DMS90704CXA, P1256703F , P1256709F , DMS90904CXA, P1256704F , P1256710F , DMS90905DXA, P1256705F , DMS91155DXA, P1256706F , GCS90453BXA, P1257201F , P1257207F , GCS90703BXA, P1257202F , P1257208F , GCS90904CXA, P1257204F , P1257209F , GCS91155DXA, P1257206F , GCV90704CXA, P1257803F , GCV90905DXA, P1257805F , GDS80453AN, GDS80453ANAA , GDS80453AX, etc Item Igniter
➢General Purpose Silicon Nitride Hot Surface Igniter For LPG/NG Every Gas Type , and easy to replace and install.If you have any questions or uncertain information, you can contact our MOFLAME technical consultant through the Amazon platform, and we will provide technical assistance within 24 hours.