-40%

RTL Valve 3/4In Return Temperature-Limiter Thermostatic Valve Underfloor-Heating

$ 16.69

Availability: 99 in stock
  • Brand: Unbranded
  • Condition: New

    Description

    RTL Valve 3/4In Return Temperature-Limiter Thermostatic Valve Underfloor-Heating
    DESCRIPTION
    Features:
    *  brand new and high quality
    *For controlling the return temperature. is a controller that maintains the desired temperature of the water in the underfloor heating system. Used to maintain temperature in mixed heating systems/underfloor heating systems/radiators.
    *An automatic controller to control the temperature of the return water from the radiator or a floor heating circuit. Temperature of the water is transferred from the valve body to the sensor. If the temperature on the valve body is lower than water temperature, the controller closes, and if is higher opens the controller.
    Specifications:
    *Material: Plastic+brass
    *Color: white(As shown)
    *Size:(As shown)
    *Connection diameter:3/4inch(DN20)
    *Connection head:M30x1,5
    *Closing dimensions:11,5mm
    Setting temperature and regulating installation:
    1. Install the temperature control valve on the radiator inlet pipe through the connecting screw.
    2. The temperature control valve shall be installed at the place where the room is in direct contact with the air. The temperature control valve shall not be placed in the heating hood.
    3. Since the vertical installation of the temperature control valve will be affected, the thermostatic head must be installed horizontally to fully feel the heat energy of the surrounding environment and ensure normal operation.
    4. When installing the sensor: adjust the housing scale to 5 and make the valve fully open. Put it on the valve body, align the position, and tighten the coupling cap in time.
    Set temperature and regulation:
    1. Turn the adjusting sleeve counterclockwise to 5 to fully open the valve.
    2. Tighten the connecting copper sleeve clockwise.
    3. Now you can rotate the adjusting jacket to set the required room temperature between * - 5.
    4. It is recommended to set the scale when sleeping at night.
    5. Build calibration when going out or ventilation.
    6. Usually heating settings.
    7. Very warm season setting.
    Package Contents:
    1Pc*Thermostatic valve
    Note:
    1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
    2. Please allow slight manual measurement deviation for the data.for roof tiles, roof tiles, roof tiles
    POLICES
    Shipping
    Payment
    WARRANTY
    We only
    ship to confirmed ebay Order addresses.
    Please comfirm that your Order address is in line with your shipping address.
    Please kindly note that
    the c
    ombined shipping
    is not provided
    because the shipping fee is calculated by weight. Also, the each additional item means
    exactly
    the the same color and size.
    It takes about
    7
    -15 working days to US; about 10-30 working days to other countries.
    Transit time may be a little delayed because of the
    bad
    weather and customs
    inspection
    . If you
    do
    not receive your
    item
    within 30 working days since payment finished, please contact us immediately for further assistance.
    Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message.
    We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions,
    p
    lease feel free to contact us via "Ask seller a question" . We will reply your email within 24
    working hours.
    On Jan 8, 2023 at 03:48:27 PST, seller added the following information: