Rebuilt EATON Model 6, Model 7 Hydrostatic Transmission

Description

THIS LISTING IS FOR COMPLETELY REMANUFACTURED
EATON MODEL 6 CW
EATON MODEL 6 CCW
EATON MODEL 7 CW
EATON MODEL 7 CCW
HYDROSTATIC TRANSMISSIONS for Grasshopper, Walker, John Deere, Cub Cadet, Toro, Wheelhorse, and others.
***
FREE SHIPPING
IN THE UNITED STATES TO THE LOWER 48***
SAVE 0
OFF
THE BUY IT NOW PRICE OF 9.99 WHEN YOU SEND IN YOUR CORE UNIT!!
This listing is for an outright purchase of a hydrostat! Core is not required, but you will receive a 0  back if you ship your rebuild-able core in (see details below)
If the unit you need is not in our inventory, consider sending your Model 6 / 7 unit to us for a rebuild (see our 9.99 rebuild-service listing)
PLEASE READ DESCRIPTION CAREFULLY!
!!!INVENTORY IS UPDATED REGULARLY! PLEASE CHECK BACK OR GIVE US A CALL IF WHAT YOU NEED IS NOT AVAILABLE!!!!
RESERVOIR IS NOT INCLUDED
WITH PURCHASE!
THESE UNITS HAVE UNDERGONE A
COMPLETE REBUILD
SERVICE
WHICH RESTORES THE POWER BACK TO THE HYDROSTAT. THIS PURCHASE INCLUDES
FREE SHIPPING TO THE LOWER 48!
IF YOU DO NOT HAVE A REBUILDABLE HYDROSTAT TO SEND US
,
YOU ARE NOT ELIGIBLE FOR THE 0 SAVINGS ON THE BUY IT NOW PRICE.
This configuration of hydrostats is for a smooth (keyed) output shaft, NOT for the splined version! If you have a splined output shaft, please contact us before purchasing.
IF YOU HAVE AN EATON MODEL 6 OR MODEL 7 HYDROSTATIC TRANSMISSION THAT NEEDS TO BE REBUILT, WE PROVIDE THAT SERVICE AS WELL! (see our listing here:
https://ebay.us/5FBO9K
)
NOT SURE OF THE ROTATION
(CW or CCW) OF YOUR HYDROSTAT? KEEP READING TO FIND OUT HOW TO TELL!
Does my hydrostat need to be rebuilt?
Over time, these hydrostats wear and develop leaks (blow-by) as the tolerances between critical interfaces grow beyond acceptable limits set forth by the original manufacturer. As a result, loss of power is experienced on the unit, especially on hot summer days. Perhaps you have experienced one hydrostat not keeping up with the other on your machine (very common). Our rebuild service will restore the power your hydrostat, eliminate the leaks, as well as remediate other common issues experienced on these units.
How do I determine the ROTATION of my Hydrostat?
1
)
All EATON hydrostats are stamped with either "CW" or "CCW" on the aluminum casting just below the Input Shaft. For example, if the unit you are sending is stamped with a "CW", then you will need to order a "CW".
2) Another way to tell is when facing the hydrostat from the side with the input shaft, look at the fan to determine what direction it must turn to blow air over the unit. If the fan must spin CCW to do this, then your unit is a CCW.
*Sending in your Core?
If you are sending us your core, the Hydrostat
must be
in rebuild-able condition
in order to be refunded 0
off the purchase price of 9.99. Units are typically rebuild-able, except in the most extreme events (i.e. – unit is cracked or seized).
If you do not have a unit to send us, you can always purchase a unit unit for 9.99, but you will not be eligible for 0 off the
Buy It Now
price.
*How do I get
0 off
the
Buy It Now
price of 9.99?
After buyer purchases hydrostat for 9.99, buyer is responsible for shipping old unit ("core") to seller in order to be eligible for 0 off the
Buy It Now
price. Once seller receives unit, seller will inspect unit to ensure it is rebuildable and will issue 0 refund to the same account used when purchase was made.
*Buyer Shipping Instructions when Sending Your Core
Upon purchase of the hydrostat for 9.99, we will ship your unit (w/ FREE SHIPPING) within 2-3 business days. Within 24 hours of your
purchase
, we will contact you with our
shipping
info of where to send your Core unit. You are responsible for the cost of shipping your core unit to us, but will receive
FREE SHIPPING
on th
e outgoing unit.
Buyer must ship core unit
WITHIN
7 CALENDAR DAYS
OF PURCHASE
.
If core unit has not been shipped by buyer within 7 days of purchase of our service,
buyer will not be eligible for 0
refund!
T
o be clear,
we are not asking
that your core unit arrives to our facility within 7 days of purchase of the service,
rather the core unit must be
shipped
by buyer within 7 calendar days of purchase of service.
After you ship your core unit,
PLEASE
MESSAGE US YOUR TRACKING NUMBER
(within the 7 calendar days from date of original purchase).
Once core unit arrives at our shop, it will be inspected and if deemed rebuild-able (not seized, cracked, mutilated, destroyed, or otherwise), your 0 refund will be issued to your account (PayPal) within 48 hours
As required by law, the hydrostatic transmission (i.e. – “hydrostat") must be
fully
drained of oil before shipping. Please ensure that hydrostat is bagged in plastic to deter any residual oil from exiting the shipping container. We have provided pictures in the item description showing how we typically package these units. Please ensure hydrostat is packaged securely and appropriately. We recommend insuring your package through the carrier, but you are welcome to do as you wish.
DO NOT SEND RESERVOIR WITH UNIT!
When shipping your core unit to us, we recommend using FedEx or UPS Ground shipping
(we
DO NOT
recommend using USPS!!
). From our experience, shipping costs generally range between and , pending on the origin and shipping service chosen.
Lastly,
please be certain to include a return shipping address on/with box.
If expedited return shipping is required, please message us. You will be charged separately for the upgraded shipping service. Your cost for this option will be the difference of the
FREE OUTGOING SHIPPING
we provide and the cost of expedited delivery.
Rebuild Process
We have been rebuilding these hydrostats for over 20 years and have been providing this service locally for over 15 years. During this time, we have noted that the wear characteristics are predominantly consistent for these hydrostats. Therefore, the standard rebuild process is as follows:
1.
Each unit is completely disassembled, inspected and cleaned.
2.
The pump and motor rotor bushings are inspected and measured with upgraded bushings installed (typical). In addition, both internal rotors are refitted with the correct ball clearances, thus bringing the clearances back into manufacturer specifications.
3.
Spindle shafts (pump and rotor sides) are inspected, measured, and replaced if necessary.
4.
Check valves are inspected for correct functionality and replaced when necessary
5.
ALL seals and gaskets are replaced BRAND NEW
6.
After assembly, each unit is run on the test stand under load to measure potential loss of performance as the unit temperature rises. Design operating temperature on these units is 180 degrees Fahrenheit, but we run them to 200 degrees Fahrenheit on the test stand in order to ensure proper operation.
Additional Service as Necessary:
We have rectified two additional problem areas of these units; early control shaft wear/leakage, and stripping of the input shaft spline:
If the control shaft spline is worn
- the wear prone control shaft bore in the aluminum housing is refitted with hard bronze bushings.
If
the input shaft spline shows signs of failure and/or excessive wear -
the input shaft spline is replaced with a much larger spline on the shaft
and
pump rotor.
NOTE: This service is
not required on all units
as not all units exhibit this condition, but we complete this service when necessary!
Everything is professionally and meticulously done because we enjoy doing so. This work requires both the skill and the tools to work to clearances and maintain tolerances measured in tenths of a thousandth of an inch (.0001").
·
NOTE1
- Yearly oil change is required
(USE
MOBIL1 15W50
ONLY
)!!! We cannot emphasize this enough!
·
NOTE2
- the input shaft is in the aluminum housing, the output shaft is in the cast iron housing.
·
NOTE3
- directions on changing output shaft rotation are included as well as contact information for any questions you may have
·
NOTE4
-  many people wonder about the differences between the Eaton Model 6 and Model 7. The ONLY difference is that the Model 7 has a design feature inside that reduces vibration on the control handlebar or control lever. The operator’s hands will not notice as much vibration. Speeds and power and dimensions are identical and
the two models are interchangeable
.
·
NOTE5
- the unit shown in the image is not the actual unit you will receive, but is an example of the high quality rebuilt unit you will receive from us.
Warranty
As much as we would like to give a warranty, we cannot, because we have no control over where, how, when and why this unit is installed. This unit is remanufactured to replace an existing unit in the same application that the existing unit was used in the first place. At the same time,
customer satisfaction is of
utmost
importance to us!
In the unlikely event you have any issues, please
do not
leave negative feedback! Instead,
please contact us so we can resolve any issues
.
You will find us pleasant to work with.
Questions?
If you have any questions about the hydrostat, rebuild process, shipping or otherwise, please don't hesitate to get ahold of us!