HAZET Torx Schlag-Schlüssel With 2 Schlagflächen 2872-E18 E20 E24 Selection

Description

2872 TORX® impact wrench with 2 impact surfaces
Application:
Actuation of TORX® screws on brake caliper screw connections on commercial vehicle front axles and trailing axles
- Use of the keys when dismantling and assembling the brake caliper screw connections eliminates the need to dismantle the tie rod lever
For e.g. MAN TGL TGM
- Proper tightening of screws with a torque wrench according to the manufacturer's instructions
- Key surface with lasered formula for calculating the correct effective length
- Made in Germany
- Drive: square 20 mm (3/4 inch)
- Output: outside TORX® profile
2872-E18
For e.g. MAN TGL TGM
- Width across flats: E18
- Dimensions / length: 215 mm
2872-E20
For e.g. MAN TGL TGM
- Width across flats: E20
- Dimensions / length: 216 mm
2872-E24
For e.g. MAN TGA TGS TGX
MERCEDES-BENZ Atego 970-976 - vehicles with air suspension brake caliper screw on the rear axle
- Width across flats: E24
- Dimensions / length: 219 mm
Notice for international buyers /
International Buyers - Please Note
:
Fees, taxes and duties for importing goods are not included in the item price or shipping costs. These costs are borne by the buyer.
Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility.
Please check with your local customs authority to determine what these additional fees may be prior to bidding and buying.
Please check with your country's customs office to determine what these additional costs will be prior to bidding / buying.
These fees are usually claimed by the customs authorities or the shipping company. Please do not confuse them for additional shipping charges.
These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.
We do not give false customs declarations - for example, we declare goods. B. not under value or as a gift to avoid taxes or duties. That would be violations of international trade law.
We do not mark merchandise values ​​below value or mark items as
"
gifts
"
- Governmental regulations prohibit such behavior.
2872 TORX® impact wrench with 2 impact surfaces Application: Actuation of TORX® screws on brake caliper screw connections on commercial vehicle front axles and trailing axles For e.g. MAN TGL TGM - Proper tightening of screws with a torque wrench according to the manufacturer's instructions - Key surface with lasered formula for calculating the correct effective length - Made in Germany - Drive: square 20 mm (3/4 inch) - Output: outside TORX® profile 2872-E18 For e.g. MAN TGL TGM - Width across flats: E18 - Dimensions / length: 215 mm 2872-E20 For e.g. MAN TGL TGM - Width across flats: E20 - Dimensions / length: 216 mm 2872-E24 For e.g. MAN TGA TGS TGX MERCEDES-BENZ Atego 970-976 - vehicles with air suspension brake caliper screw on the rear axle - Width across flats: E24 - Dimensions / l
2872 TORX® impact wrench with 2 impact surfaces Application: Actuation of TORX® screws on brake caliper screw connections on commercial vehicle front axles and trailing axles For e.g. MAN TGL TGM - Proper tightening of screws with a torque wrench according to the manufacturer's instructions - Key surface with lasered formula for calculating the correct effective length - Made in Germany - Drive: square 20 mm (3/4 inch) - Output: outside TORX® profile 2872-E18 For e.g. MAN TGL TGM - Width across flats: E18 - Dimensions / length: 215 mm 2872-E20 For e.g. MAN TGL TGM - Width across flats: E20 - Dimensions / length: 216 mm 2872-E24 For e.g. MAN TGA TGS TGX MERCEDES-BENZ Atego 970-976 - vehicles with air suspension brake caliper screw on the rear axle - Width across flats: E24 - Dimensions / l
2872 TORX® impact wrench with 2 impact surfaces Application: Actuation of TORX® screws on brake caliper screw connections on commercial vehicle front axles and trailing axles For e.g. MAN TGL TGM - Proper tightening of screws with a torque wrench according to the manufacturer's instructions - Key surface with lasered formula for calculating the correct effective length - Made in Germany - Drive: square 20 mm (3/4 inch) - Output: outside TORX® profile 2872-E18 For e.g. MAN TGL TGM - Width across flats: E18 - Dimensions / length: 215 mm 2872-E20 For e.g. MAN TGL TGM - Width across flats: E20 - Dimensions / length: 216 mm 2872-E24 For e.g. MAN TGA TGS TGX MERCEDES-BENZ Atego 970-976 - vehicles with air suspension brake caliper screw on the rear axle - Width across flats: E24 - Dimensions / l
2872 TORX® impact wrench with 2 impact surfaces Application: Actuation of TORX® screws on brake caliper screw connections on commercial vehicle front axles and trailing axles For e.g. MAN TGL TGM - Proper tightening of screws with a torque wrench according to the manufacturer's instructions - Key surface with lasered formula for calculating the correct effective length - Made in Germany - Drive: square 20 mm (3/4 inch) - Output: outside TORX® profile 2872-E18 For e.g. MAN TGL TGM - Width across flats: E18 - Dimensions / length: 215 mm 2872-E20 For e.g. MAN TGL TGM - Width across flats: E20 - Dimensions / length: 216 mm 2872-E24 For e.g. MAN TGA TGS TGX MERCEDES-BENZ Atego 970-976 - vehicles with air suspension brake caliper screw on the rear axle - Width across flats: E24 - Dimensions / l
2872 TORX® impact wrench with 2 impact surfaces Application: Actuation of TORX® screws on brake caliper screw connections on commercial vehicle front axles and trailing axles For e.g. MAN TGL TGM - Proper tightening of screws with a torque wrench according to the manufacturer's instructions - Key surface with lasered formula for calculating the correct effective length - Made in Germany - Drive: square 20 mm (3/4 inch) - Output: outside TORX® profile 2872-E18 For e.g. MAN TGL TGM - Width across flats: E18 - Dimensions / length: 215 mm 2872-E20 For e.g. MAN TGL TGM - Width across flats: E20 - Dimensions / length: 216 mm 2872-E24 For e.g. MAN TGA TGS TGX MERCEDES-BENZ Atego 970-976 - vehicles with air suspension brake caliper screw on the rear axle - Width across flats: E24 - Dimensions / l
2872 TORX® impact wrench with 2 impact surfaces Application: Actuation of TORX® screws on brake caliper screw connections on commercial vehicle front axles and trailing axles For e.g. MAN TGL TGM - Proper tightening of screws with a torque wrench according to the manufacturer's instructions - Key surface with lasered formula for calculating the correct effective length - Made in Germany - Drive: square 20 mm (3/4 inch) - Output: outside TORX® profile 2872-E18 For e.g. MAN TGL TGM - Width across flats: E18 - Dimensions / length: 215 mm 2872-E20 For e.g. MAN TGL TGM - Width across flats: E20 - Dimensions / length: 216 mm 2872-E24 For e.g. MAN TGA TGS TGX MERCEDES-BENZ Atego 970-976 - vehicles with air suspension brake caliper screw on the rear axle - Width across flats: E24 - Dimensions / l
2872 TORX® impact wrench with 2 impact surfaces Application: Actuation of TORX® screws on brake caliper screw connections on commercial vehicle front axles and trailing axles For e.g. MAN TGL TGM - Proper tightening of screws with a torque wrench according to the manufacturer's instructions - Key surface with lasered formula for calculating the correct effective length - Made in Germany - Drive: square 20 mm (3/4 inch) - Output: outside TORX® profile 2872-E18 For e.g. MAN TGL TGM - Width across flats: E18 - Dimensions / length: 215 mm 2872-E20 For e.g. MAN TGL TGM - Width across flats: E20 - Dimensions / length: 216 mm 2872-E24 For e.g. MAN TGA TGS TGX MERCEDES-BENZ Atego 970-976 - vehicles with air suspension brake caliper screw on the rear axle - Width across flats: E24 - Dimensions / l
2872 TORX® impact wrench with 2 impact surfaces Application: Actuation of TORX® screws on brake caliper screw connections on commercial vehicle front axles and trailing axles For e.g. MAN TGL TGM - Proper tightening of screws with a torque wrench according to the manufacturer's instructions - Key surface with lasered formula for calculating the correct effective length - Made in Germany - Drive: square 20 mm (3/4 inch) - Output: outside TORX® profile 2872-E18 For e.g. MAN TGL TGM - Width across flats: E18 - Dimensions / length: 215 mm 2872-E20 For e.g. MAN TGL TGM - Width across flats: E20 - Dimensions / length: 216 mm 2872-E24 For e.g. MAN TGA TGS TGX MERCEDES-BENZ Atego 970-976 - vehicles with air suspension brake caliper screw on the rear axle - Width across flats: E24 - Dimensions / l
2872 TORX® impact wrench with 2 impact surfaces Application: Actuation of TORX® screws on brake caliper screw connections on commercial vehicle front axles and trailing axles For e.g. MAN TGL TGM - Proper tightening of screws with a torque wrench according to the manufacturer's instructions - Key surface with lasered formula for calculating the correct effective length - Made in Germany - Drive: square 20 mm (3/4 inch) - Output: outside TORX® profile 2872-E18 For e.g. MAN TGL TGM - Width across flats: E18 - Dimensions / length: 215 mm 2872-E20 For e.g. MAN TGL TGM - Width across flats: E20 - Dimensions / length: 216 mm 2872-E24 For e.g. MAN TGA TGS TGX MERCEDES-BENZ Atego 970-976 - vehicles with air suspension brake caliper screw on the rear axle - Width across flats: E24 - Dimensions / l